в замке 3B фаервол (F1)
в щитке 11 для програмирования, 61 доступ к еепром
в щитке два уровня доступа, 27 11 - програмирование, 27 61 - доступ к еепром.
NRC 13 - не верная длина строки.
response - 7F 3D 33
7F - отказ
3D - команда на что отказ
33 - причина.
Following table mentions UDS NRCs for UDS SID with 0x7F.
в щитке 11 для програмирования, 61 доступ к еепром
в щитке два уровня доступа, 27 11 - програмирование, 27 61 - доступ к еепром.
NRC 13 - не верная длина строки.
0x31 | requestOutOfRange |
response - 7F 3D 33
7F - отказ
3D - команда на что отказ
33 - причина.
Following table mentions UDS NRCs for UDS SID with 0x7F.
UDS NRC | Description |
---|---|
0x10 | General Reject |
0x11 | Service not supported |
0x12 | Sub Function not supported |
0x13 | Invalid message length/format |
0x14 | Response too long |
0x21 | Busy-repeat request |
0x22 | Conditions not correct |
0x24 | Request sequence error |
0x25 | No response from subnet component |
0x26 | Failure prevents execution of requested action |
0x31 | Request out of range |
0x33 | Security access denied |
0x35 | Invalid Key |
0x36 | Exceeded number of attempts |
0x37 | Required time delay has not expired |
0x70 | Upload/download not accepted |
0x71 | Transfer data suspended |
0x72 | Programming failure |
0x73 | Wrong block sequence counter |
0x78 | Request received - response pending |
0x7E | Sub function not supported in active session |
0x7F | Service not supported in active session |
0x81/0x82 | RPM too high/low |
0x83/0x84 | Engine is running/ not running |
0x85 | Engine run time too low |
0x86/0x87 | Temperature too high/low |
0x88/0x89 | Speed too high/low |
0x8A/0x8B | Throttle pedal too high/low |
0x8C/0x8D | Transmission range not in neutral/dear |
0x8F | Brake switches not closed |
0x90 | Shifter lever not in park |
0x91 | Torque converter clutch locked |
0x92/0x93 | Voltage too high/low |
0xF0-0xFE | Manufacturer specific conditions not correct |
Последнее редактирование: